C21 (474.0MHz) after switchover
The map below shows all the transmitters in the UK using C21 once digtial switchover is complete. Please click the icon to see the coverage area, and double click for more information.
map is loading, please wait...
What do the map symbols mean?
COM4/SDN multiplex, COM4/SDN multiplex, COM5/ArqivaA multiplex, COM6/ArqivaB multiplex, PSB1/BBCA multiplex, PSB1/BBCA multiplex, PSB2/Digital 3+4 multiplex, PSB2/Digital 3+4 multiplex, PSB3/BBCB/Freeview HD multiplex, PSB3/BBCB/Freeview HD multiplex, Saorview multiplex 1, Saorview multiplex 1.Before switchover
Click on a selection to see the use of the frequency use before switchover:C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C50 C51 C52 C53 C54 C55 C56 C57 C58 C59 C60 C61 C62 C63 C64 C65 C66 C67 C68
Switchover complete
Click on a selection to see the use of the frequency use when switchover is complete:C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C50 C51 C52 C53 C54 C55 C56 C57 C58 C59 C60 C61 C62 * * * * * *
Tuesday, 17 January 2012
Sunday, 5 February 2012
C
Chloe1:12 AM
Hi, I have a JVC tv in my bedroom and have recently tuned in to receive digital, which is built I (I never used this before as it was connected to a sky box.
Every time I turn the tv off and back on again, I have to retune it all as it loses all the channels. My tv downstairs works fine so I know it isn't an aerial problem. I have tried restoring to factory settings but this doesn't work.
Please can't anyone help? Thanks!
| link to this comment |
J
jb389:27 AM
Chloe: Without knowing the model number of the JVC TV, but if after having re-tuned and you selected to store the channels found, as this is not done automatically on every device, and yet you have lost them again after having switched the TV off completely then that's inclined to point to a fault in the tuners memory chip.
This said taking it that you genuinely carried out a factory reset, as this fault is usually always caused by the TV having picked up more channels than its memory can store hence they are lost on switch off, and if you have already carried out the reset then there isn't anything else you can do.
Just as a test though, carry out a re-tune without the aerial connected, then after re-connecting again give the set a second scan.
| link to this comment |
Wednesday, 8 February 2012
M
Mike Robson11:30 AM
I've just retuned my freeview box so as to be able to receive the BBC channels, which have altered. However, having done this, the BBC News Channel now automatically reverts to BBC1. How do I get the News Channel to stay there ?
| link to this comment |
Sunday, 11 March 2012
R
Rod1:38 PM
Hi just bought a new DVB-T receiver and connected all up switched on got great reception but only can get BBC channels cannot get any ITV etc we are OAP so any help will be appreciated thanks
| link to this comment |
Rod - have you had a digital receiver before or is this your first one ? - possibly need an aerial upgrade - I know this is vague but without knowing more its difficult to say - without putting some test equipment to see what the signal strength is like
Keith - kb aerials sheffiled
07946481125
Aerialsinsheffield.co.uk
| link to this comment |
K
kev askey3:53 PM
Sutton Coldfield
my tevion 19"has lost channels 3,4,5,6,8,and reprograming them does not bring them back
| link to this comment |
kev's: mapK's Freeview map terrainK's terrain plot wavesK's frequency data K's Freeview Detailed Coverage
J
jb3811:11 PM
kev askey: As you are virtually the next door neighbour to Sutton Coldfields mast try taking the aerial out of the TV and carrying out a re-scan with only a short (about 12" or so) piece of wire inserted into the inner part of the aerial socket and see what transpires, or better still a set top aerial should you have access to one.
What model of Tevion do you have?
| link to this comment |
Select more comments
Your comment please