menuMENU    UK Free TV logo Archive (2002-)

 

 

Click to see updates

All posts by Briantist

Below are all of Briantist's postings, with the most recent are at the bottom of the page.

Freeview reception has changed?
Sunday 5 June 2011 4:30PM

Al Williams: Your transmitter is the Sandy Heath transmitter. You should get the three public service multiplexes OK from it before 28 Sep 11, and then you might loose them again in November until 18 Apr 12.

If you have poor analogue reception is not 100% that you will get reception at switchover.

Freesat might be a good choice until 18 Apr 12 to be honest, see Compare Freeview and Freesat TV | ukfree.tv - independent free digital TV advice .

link to this comment
GB flag
Single frequency interference
Sunday 5 June 2011 4:31PM

papakorn: You have not provided a postcode so I can't be sure.

It might be you have too much signal. If you have a booster or amplifier in your system, try removing it.

link to this comment
GB flag
Freeview modes
Sunday 5 June 2011 4:33PM

Ian: It is quite likely your signal are too strong now. If you have any boosters or amplifiers, remove them from your system.

link to this comment
GB flag

John: Inversion is very unlikely with the current weather conditions. I would also check Freeview reception has changed? | ukfree.tv - independent free digital TV advice - trees coming into leaf near to your aerial can often be the problem.

link to this comment
GB flag

Nick: I would be interested to hear what you manage to find out.

link to this comment
GB flag

davis: You should get all the Freesat-from-Sky channels (except 5*, 5USA and PICKTV) without any card at all.

The signal from the satellite can't effect the sound, check your SCART cable is in good order and the settings.

If you have "three channels and bad audio" this suggest you have an analogue terrestrial signal on a transmitter that is switching over.

link to this comment
GB flag

Nick: I would just ensure that everything is set to "default" on the TV and you have "sharpening" off. Check you are using the RGB setting if you are using a SCART connection.

link to this comment
GB flag