All posts by A1batman
Below are all of A1batman's postings, with the most recent are at the bottom of the page.A
Two new Freeview channels - almost everywhere | Freeview newsWednesday 11 July 2012 10:46PM
Sandbach
I have a central range aerial on my roof aligned to the Wrekin transmitter, and can get all programs on mux's PSB1, PSB2, COM4, but not mux's COM5 & COM6. The TV's indicated signal strength and quality for rf channel 41 is 63% and 66% respectively. All programs on this frequency tune in okay, whereas the sig level and strength for rf channel 44 is only 61% & 58% but no programs are found. Is this likely to be due to the lower power output level for mux COM5 although it's indicated as being the same output level as COM4 which gives me no problem. Is the power output going to be increased from the indicated 10Kw in the near future?
Kind regards from A1batman.
| link to this comment |
Your winter hill freeview transmitter frequencies are showing to be moved from what they were two weeks ago. I am still receiving my freeview programs on channels 31,37,49,50,54,55.58 & 59. I no longer receive the programs that were on RF channels 56 & 57 possibly due to reduced signal level.
These RF channels are not as shown on your web site for the winter hill transmitter (https://ukfree.tv/transmitters/tv/Winter_Hill). They are shown as RF channels 29, 31, 32, 34, 35, 37, 56, & 57. I do not get any signal on these channels except 31 & 37, which have been the usual winter hill frequencies for some time now. Is the web site wrong with regard to my indicated program frequencies or are they the intended ones after the next transmitter's retune.
Kind regards from Roger Livesey.
| link to this comment |
Wednesday 11 July 2012 10:25PM
Sandbach
Central frequency range aerial on roof and can get all programs on mux's PSB1, PSB2, COM4, but not mux's COM5 & COM6. The TV's indicated signal strength and quality for rf channel 41 is 63% and 66% respectively. All programs on this frequency tune in okay, where as the sig level and strength for rf channel 44 is only 61% & 58% but no programs are found. Is this likely to be due to the lower power output level for mux COM5 although it's indicated as being the same output level as COM4 which gives me no problem. Is the power output going to be increased from the indicated 10Kw in the near future?
Kind regards from A1batman.