All posts by Chris.SE
Below are all of Chris.SE's postings, with the most recent are at the bottom of the page.
Mark Wheeler:
I assume you got all channels with no problem before April 4th. Do you live in flats?
Also tell us about your aerial installation, age etc, have you got an amplifier etc.?
Can you tell us how old your Samsung set is?
| link to this comment |
Dave Hunter:
Out of curiosity try selecting Yorkshire and Lincolnshire and see what happens, especially as you said in an earlier post that you get East Midlands Today. Remember to clear all previous channels/settings by doing a reset first.
| link to this comment |
sparky:
I wouldn't give up with that "Digihome" just yet.
It has the latest software version for that model which "should" cope with the current transmissions.
I suspect overload could be the problem. Whilst there is no reason not to look at the PVR jb38 has mentioned, as far as the Digihome is concerned there is another possibility.
With the rough location and height you mentioned you may have picked up another transmitter as all surrounding transmitters are now on high power. Quoting your postcode would enable a more informed comment on that.
Otherwise I'd wait until the 18th and have a final play with the attenuator - of course if you have an aerial amplifier, this should be removed if the attenuator seems to solve the problem.
| link to this comment |
Yes, and if you look at the Transmission Frequencies towards the top of the transmitter pages you will see the channels allocated to additional commercial services COM7/8/9.
| link to this comment |
Ed Stone:
Street is close to the Mendip transmitter. Can you see the transmitter from your location?
Your postcode, put into the box on the top RHS of the page will help people to give more specific advice.
| link to this comment |
The Wakefield:
No, there are no known problems at the transmitter. As advised to Ed Stone, your postcode put in the box will enable more specific advice. Did you have any problems before this last change and power up?
| link to this comment |
What sort of signal strength (& quality) does your receiver indicate for each Mux?
| link to this comment |
Saturday 7 April 2012 4:37AM
Peter Suthers:
Delete the duplicates and see if that solves it.