All posts by Brian Stanley
Below are all of Brian Stanley's postings, with the most recent are at the bottom of the page.Are all relay dab transmitters switched on in Scottish Borders is Peebles, Jedburgh Yetholm.
| link to this comment |
Selkirk transmitter will change broadcasting frequencies in 2020. All current channels will move to 22, 25 and 28 other 3 are 41,44 and 47. The three in the forties are same as three transmitted from Chatton transmitter in North Northumberland which I have tuned into. Will there be any cross interference which will affect the reception of these frequencies when change over takes place. I know that current Selkirk transmitter aerials are to be replaced with ones suitable for new frequencies.
| link to this comment |
After retune in Scottish Borders a new aerial had to be fitted. Location is Duns, after aerial was fitted all channels from Selkirk are being received plus channels 26, 28 and 29 from Caldbeck. Also all channels from Chatton are being received. A mast head amplifier is fitted. No co channel interference is being experienced.
| link to this comment |
Has Selkirk transmitter changed to the new frequencies as from March 1st 2017 as stated. I was led to believe that only channel 50 that broadcast bbc sd channels had changed to channel 32
| link to this comment |
Transmitter engineering: is there a problem with HD transmissions from Eyemouth. Many outages over the past few months. Sony tv channel 101 BBC Scotland has been replaced by BBC 1 HD. Channel 804 that normally has BBC 1HD is displaying ZDF
| link to this comment |
Yet again today hd channels from Eyemouth transmitter go off air. What is he problem
| link to this comment |
Friday 2 August 2013 10:32PM
Duns
I have recently purchased a Humax Fox T2 receiver coupled to a Panasonic with Freeview HD tuner when the Humax is switched on all is OK but when in standby mode I lose all HD channels broadcast on channel 55 from Selkirk but still receive HD channels from Chatton on Channel 39
I have a booster for the Selkirk aerial which has not caused any problems prior to the installation of the Humax receiver