C65 (826.0MHz) after switchover
The map below shows all the transmitters in the UK using C65 once digtial switchover is complete. Please click the icon to see the coverage area, and double click for more information.
map is loading, please wait...
What do the map symbols mean?
4G-800 No multiplexes, 4G-800 1 multiplex, 4G-800 2 multiplexes, 4G-800 3 multiplexes, 4G-800 4 multiplexes, 4G-800 5 multiplexes, 4G-800 6 multiplexes, Locations within 1.5km of existing phone mast locations, Freeview retune required, EE, Multiple operators, Network Rail, O2, 3, Vodafone, location on line-of-sight, Empty, Location comment, Transmitter (grey), Selected location, l, lv, panelAB, panelAL, panelB, panelBA, panelBB, panelBD, panelBH, panelBL, panelBN, panelBR, panelBS, panelBT, panelCA, panelCB, panelCF, panelCH, panelCM, panelCO, panelCR, panelCT, panelCV, panelCW, panelDA, panelDD, panelDE, panelDG, panelDH, panelDL, panelDN, panelDT, panelDY, panelE, panelEC, panelEH, panelEN, panelEX, panelFK, panelFY, panelG, panelGL, panelGU, panelHA, panelHD, panelHG, panelHP, panelHR, panelHS, panelHU, panelHX, panelIG, panelIP, panelIV, panelKA, panelKT, panelKW, panelKY, panelL, panelLA, panelLD, panelLE, panelLL, panelLN, panelLS, panelLU, panelM, panelME, panelMK, panelML, panelN, panelNE, panelNG, panelNN, panelNP, panelNR, panelNW, panelOL, panelOX, panelPA, panelPE, panelPH, panelPL, panelPO, panelPR, panelRG, panelRH, panelRM, panelS, panelSA, panelSE, panelSG, panelSK, panelSL, panelSM, panelSN, panelSO, panelSP, panelSR, panelSS, panelST, panelSW, panelSY, panelTA, panelTD, panelTF, panelTN, panelTQ, panelTR, panelTS, panelTW, panelUB, panelW, panelWA, panelWC, panelWD, panelWF, panelWN, panelWR, panelWS, panelWV, panelYO, panelZE, Phase 2 locality, roundel-dlr, roundel-overground, roundel-tube, Transmitter, BBC One region, BBC TWO, ITV plc region, STV region, UTV region, Channel 4, Channel 5, S4C, tx_LB, tx_LBN, tx_LBNv, tx_LBS, tx_LBSv, tx_LBT, tx_LBTv, tx_LBv, tx_LCF, tx_LCFv, tx_LDN, tx_LDNv, tx_LEH, tx_LEHv, tx_LG, tx_LGv, tx_LL, tx_LLS, tx_LLSv, tx_LLv, tx_LM, tx_LMv, tx_LNE, tx_LNEv, tx_LNG, tx_LNGv, tx_LNR, tx_LNRv, tx_LOX, tx_LOXv, tx_LPR, tx_LPRv, tx_LS, tx_LSO, tx_LSOv, tx_LSv, tx_LW, tx_LWv, COM4/SDN multiplex, COM4/SDN multiplex, COM5/ArqivaA multiplex, COM5/ArqivaA multiplex, COM6/ArqivaB multiplex, COM6/ArqivaB multiplex, tx_com7, HD-com7 multiplex site, HD-com7 multiplex site, tx_com8, HD-com8 multiplex site, HD-com8 multiplex site, Multiplex 1, Multiplex 2, Multiplex A, tx_muxAcopy, Multiplex B, Multiplex C, Multiplex D, Northern Ireland Minimux, Northern Ireland Minimux, PSB1/BBCA multiplex, PSB1/BBCA multiplex, PSB2/Digital 3+4 multiplex, PSB2/Digital 3+4 multiplex, PSB3/BBCB/Freeview HD multiplex, PSB3/BBCB/Freeview HD multiplex, Saorview multiplex 1, Saorview multiplex 1, Saorview multiplex 2, Saorview multiplex 2, BBC VHF TV site, Joint BBC/IBA site, DAB radio transmitter, DAB transmitter coming, DAB coming (out of area), DAB transmitter (out of area), Freeview transmitter, txfv - Copy, IBA VHF TV site, Freeview light transmitter, Multiplex A, Multiplex B, Multiplex C, Multiplex D, txmuxa2, Not on air, FM/AM radio mast, txradio_amfm, FM/AM radio mast (out of area), Engineering/fault today, Engineering planned, Transmitter cleared fault, Engineering work (old icon), Transmitter group, Saorview, txsv - Copy.Before switchover
Click on a selection to see the use of the frequency use before switchover:C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C50 C51 C52 C53 C54 C55 C56 C57 C58 C59 C60 C61 C62 C63 C64 C65 C66 C67 C68
Switchover complete
Click on a selection to see the use of the frequency use when switchover is complete:C21 C22 C23 C24 C25 C26 C27 C28 C29 C30 C31 C32 C33 C34 C35 C36 C37 C38 C39 C40 C41 C42 C43 C44 C45 C46 C47 C48 C49 C50 C51 C52 C53 C54 C55 C56 C57 C58 C59 C60 C61 C62 * * * * * *
Saturday, 12 November 2011
12:12 PM
hello i live in London, i tried to reset my channels because i don't have channel 4 or the e4 channels, could someone tell me how to do it please
| link to this comment |
M
Mark Fletcher4:30 PM
Halifax
sam.Hard to say without a full postcode.Also you did not specify whether yer Freeview TV or set-top box requires resetting.Complete a full reset by firstly plugging out yer Freeview TV or set-top box from the mains,then unplug yer aerial from either the Freeview TV or set-top box you plan to reset,wait roughly 30 seconds,replug either Freeview TV or set-top box back in,then with yer aerial still unplugged (do not plug in at this stage or your reset will fail and you will have to reset again) perform a First time installation (automatic scan) ,it will completely fail to store any channels but simultaneously clears the previous memory by resetting yer Freeview TV or set-top box back to its default factory settings,then reinsert yer aerial back into either yer Freeview TV or set-top box and perform a complete scan (either automatic or manual ) once again which hopefully this time will store yer channels.Just out of interest is your aerial horizontally polarised facing Crystal Palace mounted outside and importantly if within a poor reception or marginal area within this transmitter itself is it a group A aerial you are using and not an inferior group W wideband aerial,as in rare cases a cheap inferior contract group W wideband aerial may not pick up the lowest frequencies (ch's 21-25 being worst offenders),and even possibly ommitting the highest frequencies too (ch's 65-68 (or 69) also worst offenders here too).What you described about not receiving Channel4,E4,etc, you are missing the multiplex 2 set from Crystal Palace transmitter which is broadcasting on frequency 22 on the digital platform.If your aerial is an inferior group W wideband in a poor reception or marginal area within Crystal Palace transmitting area itself,then replace it with a group A Yagi 18A external aerial using superior quality satellite grade black or brown coloured co-ax cable,and importantly using a brass co-ax aerial plug,not alloy or worse plastic plugs they're useless !
| link to this comment |
Mark's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
Saturday, 21 April 2012
L
Lucy12:59 AM
HELP! If my tv doesn't have a set top box how do I tune in channels? I only had 4 channels before the 18th and was fine with that but now I have none. Do I have to have a set top box to have tv channels?
P.s. Post code hp51pe
| link to this comment |
Lucy: Assuming that the four channels were BBC One, BBC Two, ITV and Channel 4, then these were probably the analogue ones, in which case analogue has been switched off now, so your TV will need a separate set-top box to receive TV channels.
| link to this comment |
Lucy: If your TV has a scart socket, then all set-top boxes will work. If it doesn't, then you will need one with an in-built modulator which outputs the box's picture in analogue form (the same type as has just been switched off).
One example of a box with a modulator in is this one:
http://www.comet.co.uk/p/…8737
As I say, if your TV has a scart, then you are free to choose any Freeview set-top box.
| link to this comment |
Select more comments
Your comment please