Full Freeview on the Whitehawk Hill (Brighton and Hove, England) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 50.825,-0.113 or 50°49'29"N 0°6'47"W | BN2 5EL |
The symbol shows the location of the Whitehawk Hill (Brighton and Hove, England) transmitter which serves 96,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Whitehawk Hill (Brighton and Hove, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Whitehawk Hill (Brighton and Hove, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which Freeview channels does the Whitehawk Hill transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
The Whitehawk Hill (Brighton and Hove, England) mast is a public service broadcasting (PSB) transmitter, it does not provide these commercial (COM) channels: .
If you want to watch these channels, your aerial must point to one of the 80 Full service Freeview transmitters. For more information see the will there ever be more services on the Freeview Light transmitters? page.
Which BBC and ITV regional news can I watch from the Whitehawk Hill transmitter?
BBC South East Today 0.8m homes 3.2%
from Tunbridge Wells TN1 1QQ, 43km northeast (36°)
to BBC South East region - 45 masts.
ITV Meridian News 0.9m homes 3.6%
from Whiteley PO15 7AD, 80km west (274°)
to ITV Meridian (South Coast) region - 39 masts.
All of lunch, weekend and 50% evening news is shared with all of Meridian plus Oxford
How will the Whitehawk Hill (Brighton and Hove, England) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 16 Oct 2019 | ||||
VHF | C/D E | E | E | C/D E T | W T | ||||
C2 | BBCtvwaves | ||||||||
C34 | ArqA | ||||||||
C35 | C5waves | C5waves | D3+4 | ||||||
C36 | BBCB | ||||||||
C40 | _local | ||||||||
C48 | ArqB | ArqB | |||||||
C51tv_off | BBCB | ||||||||
C53tv_off | C4waves | C4waves | C4waves | D3+4 | |||||
C54tv_off | LBN | ||||||||
C56tv_off | ArqA | ||||||||
C57tv_off | BBC1waves | BBC1waves | BBC1waves | SDN | SDN | ||||
C60tv_off | ITVwaves | ITVwaves | ITVwaves | -BBCA | BBCA | ||||
C63 | BBC2waves | BBC2waves | BBC2waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 7 Mar 12 and 21 Mar 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 10kW | |
Analogue 5 | (-3dB) 5kW | |
SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-4dB) 4kW | |
Mux B* | (-10dB) 1000W | |
Mux 2*, Mux C*, Mux D*, LBN | (-14dB) 400W | |
Mux 1*, Mux A* | (-17dB) 200W |
Which companies have run the Channel 3 services in the Whitehawk Hill transmitter area
|
|
Friday, 13 October 2023
C
Chris.SE7:06 PM
Clare McNeil :
Ah, I can see where the confusion is -
Quote "The manual tuning is only showing channels 22-66."
That's precisely what it should be showing it's the UHF channels for the multiplexes not the TV Programme channels. When tuning manually you select the UHF channel for the multiplex you want. An automatic tune would go through all 22-66.
When retuning you do the UHF channels not the TV programme numbers so you do't do 1,2, 231 etc.
So in your case you need to choose 48 to start and tell it to tune.
After it's done that then select 36 and tell it to tune. But as it's an old set in my not be HD so 36 may not get anything (these are for the High definition channels that are at the programme numbers 101-107 etc.
Hope that helps, try again.
PS. Sony sets are normally quite good.
link to this comment |
Clare McNeil
7:49 PM
7:49 PM
Hi Chris SE
Thanks so much for your help I followed
your instructions and have every BBC channel except BBC
one. It's showing BBC 2 instead, so I have two BBC 2
now.
Many thanks.
link to this comment |
C
Chris.SE8:11 PM
Clare McNeil :
Ah good, at least you are picking up the multiplex ok, that's very odd about 2 BBC2s.
IF you are getting all the other channels ok, the full 120+ of them, without any interference or pixellation, you could try tuning from scratch, but have a look to see what you are getting first.
link to this comment |
Clare McNeil
8:27 PM
8:27 PM
Hi Chris SE
Just quick update. I now have BBC 1 and 2 correctly
now, however the signal is not great. The weather
has suddenly turned nasty. All other BBC channels are
fine. I won't do a re tune and see how it goes.
Many thanks for all your time and help. I have
learnt so much.
link to this comment |
C
Chris.SE9:54 PM
Clare McNeil :
No problem. Post back if you need more help. As you say, best not to retune and see how it goes.
Don't be afraid to ask any questions even if they might seem silly ;)
link to this comment |
Saturday, 21 October 2023
S
Sarah Bagg10:04 PM
Completely lost HD channels, I've retuned several times but still no HD
link to this comment |
C
Chris.SE11:21 PM
Sarah Bagg:
You must have been correctly tuned initially. Why have you retuned? You cannot tune a signal that is not there.
If you have no signal or badly pixellated pictures it is never advised to retune if you were correctly tuned to start with, whatever the cause, be it weather conditions, transmitter faults or maintenance or your aerial system problems.
Doing so will often just clear the correct tuning or sometimes tune you to a weaker signal from another transmitter which will often disappear.
There are currently no reported faults that I can find and the transmitter isn't listed for Planned Engineering at this time.
Are you having any problems with any other channels, if so please list some of them?
Sometimes aerial system faults can cause the loss of one multiplex without any obvious/immediate effects on the others.
Check that your aerial is still pointing correctly, that the coax downlead isn't flapping in the wind, and check your coax plugs are in correctly with no corrosion or water.
To avoid the possibility of losing other multiplexes whatever the cause, you'd be best advised to do a Manual retune for the UHF channel of the missing multiplex. (Unfortunately the site owner hasn't had time to update every transmitter page with the full changes since the 700MHz Clearance programme so those at the top of the page aren't the complete current list).
(in the multiplex order) PSB1/BBCA, PSB2/D3&4, PSB3/BBCB HD, COM4/SDN, COM5/ARQA, COM6/ARQB.
Whitehawk Hill's UHF channels are C48, C35, C36, C32, C34, C33.
The LOCAL Multiples L-BTN is on C40.
If you hover on each of the aforementioned channel numbers, it'll give you the frequency if you need to know those.
So try manual tuning UHF channel C36 for the BBCB HD multiplex.
See Channel listings for Industry Professionals | Freeview for which TV channels are carried on which multiplex.
link to this comment |
Friday, 15 December 2023
J
John Todd6:15 PM
For the last few weeks in North Shoreham, many channels are showing "No signal. Please check your antenna connection" whilst many channels are perfectly OK (so the antenna is connected). Om another television using a separate aerial, the picture is very pixelated.
Both were perfect but suffered this problem at the same time a few weeks ago.
I note on the above information engineering is taking place on Whitehawk Transmitter.
Can I assume this is the problem? As both aerials are having the same problem at the same time, I assume it can only be the transmitter
link to this comment |
S
Steve Donaldson8:59 PM
John Todd: Whitehawk Hill is not listed by Freeview as having engineering works:
Planned engineering works | Freeview
This doesn't necessarily mean for certain that it isn't, assuming that works can always overrun and perhaps not be listed.
Another possibility, other than transmitter works, is interference by a mobile phone base station and/or mobile handsets/devices in the 700MHz or 800MHz frequency ranges, these frequencies formerly used for TV. Restore TV is the organisation responsible for alleviating such interference. They will provide a free filter to prevent the unwanted mobile signals getting into the TV/set-top box.
If you have an amplifier then the filter should go before it. If the amplifier is on the roof then this will require a special outdoor, waterproof filter. Restore TV should send an engineer to fit this should it apply here.
Details for Restore TV are here: https://restoretv.uk
One of the FAQs relates to having more than one TV. It says they will send more than one filter on request. I don't know whether they will send one filter and ask you to try it on both TVs and get back to them if you need a second, or whether they will send you two filters.
link to this comment |
Saturday, 16 December 2023
C
Chris.SE3:29 PM
John Todd:
As you've had this problem for a few weeks and on two separate TVs and aerials, then it's a reasonable assumption that it could be one of the two possibilities Steve has mentioned. It would not surprise me that whatever the engineering work for DAB, it could well have an impact on Freeview transmissions from time to time as you can't work on a mast near the antenna when they're at full power, and this has been an oversight where it's not ended up with a listing for impact on Freeview!
Do check if you've had or should have had a postcard https://restoretv.uk/post…ure/
There is another possibility, that some very local external factors may be the cause, such as a new tall building or scaffolding etc springing up on the line-of-sight to the transmitter. It's unlikely to be things like solar panels, water tanks etc if the aerials aren't in a loft.
BUT just to compound matters for the next couple of days (wouldn't have been the initial problem) and likely to get worse tomorrow, is the presence of some Tropospheric Ducting causing co-channel interference (continental interference in old money) mainly affecting southern parts of the country.
The BBC have issued warnings as well.
This won't necessarily affect all multiplexes or even more than one and the effects could be short - seconds or minutes, or even longer - several hours. It will depend on particular conditions and location at the time.
link to this comment |
Select more comments
Your comment please