Full Freeview on the Tacolneston (Norfolk, England) transmitter
 | Google Streetview |  | Google map |  | Bing map |  | Google Earth |  | 52.518,1.139 or 52°31'6"N 1°8'22"E |  | NR16 1DW |
The symbol shows the location of the Tacolneston (Norfolk, England) transmitter which serves 330,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
This transmitter has no current reported problems
The BBC and Digital UK report there are no faults or engineering work on the Tacolneston (Norfolk, England) transmitter._______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Tacolneston transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Tacolneston transmitter?
BBC Look East (East) 0.8m homes 3.2%
from Norwich NR2 1BH, 16km northeast (37°)
to BBC East region - 27 masts.
70% of BBC East (East) and BBC East (West) is shared output
ITV Anglia News 0.8m homes 3.2%
from NORWICH NR1 3JG, 16km northeast (38°)
to ITV Anglia (East) region - 26 masts.
All of lunch, weekend and 80% evening news is shared with Anglia (West)
Are there any self-help relays?
| Gt Yarmouth | Transposer | 1 km S town centre | 30 homes |
| Lowestoft (2) | Transposer | Rotterdam Rd | 125 homes |
How will the Tacolneston (Norfolk, England) transmission frequencies change over time?
| 1950s-80s | 1984-97 | 1997-98 | 1998-2011 | 2011-13 | 2013-18 | 2013-17 | 17 Jul 2018 | ||
| VHF | C/D E | C/D E | C/D E | E | E T | W T | W T | ||
| C3 | BBCtvwaves | ||||||||
| C31 | com7 | com7 | |||||||
| C32 | _local | ||||||||
| C37 | com8 | com8 | |||||||
| C39 | +ArqB | +ArqB | ArqB | ||||||
| C40 | BBCA | ||||||||
| C42 | SDN | SDN | SDN | SDN | |||||
| C43 | D3+4 | ||||||||
| C45 | ArqA | ArqA | ArqA | ArqA | |||||
| C46 | BBCB | ||||||||
| C50tv_off | BBCB | BBCB | |||||||
| C52tv_off | C5waves | C5waves | |||||||
| C55tv_off | BBC2waves | BBC2waves | BBC2waves | -BBCA | -BBCA | -BBCA | com7tv_off | ||
| C56tv_off | COM8tv_off | ||||||||
| C57tv_off | LNR | LNR | |||||||
| C59tv_off | ITVwaves | ITVwaves | ITVwaves | -D3+4 | -D3+4 | -D3+4 | |||
| C62 | BBC1waves | BBC1waves | BBC1waves | BBCB | |||||
| C65 | C4waves | C4waves | C4waves |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 9 Nov 11 and 23 Nov 11.
How do the old analogue and currrent digital signal levels compare?
| Analogue 1-4 | 250kW | |
| SDN, ARQA, ARQB, BBCA, D3+4, BBCB | (-4dB) 100kW | |
| com7 | (-9.6dB) 27.4kW | |
| com8 | (-10.2dB) 24kW | |
| Mux 1*, Mux 2*, LNR | (-14dB) 10kW | |
| Mux A*, Mux B*, Mux C*, Mux D* | (-17dB) 5kW | |
| Analogue 5 | (-18dB) 4kW |
Local transmitter maps
Tacolneston Freeview Tacolneston DAB Tacolneston TV region BBC East Anglia (East micro region)Which companies have run the Channel 3 services in the Tacolneston transmitter area
|
|
Sunday, 11 December 2011
C
Chris Wildey2:09 PM
Yes the council did ask people in flats what they wanted but they never asked those in houses. Never told us it would be cut off.
| link to this comment |
Monday, 12 December 2011
T
Trevor11:48 AM
Great Yarmouth
Dave, thanks for the advice. On my Samsung tv I went Menu, Antenna, Manual Tuning, Digital Channel Tuning then hit the red button to add a new Channel. I selected Channel 62 and then Search and it added the 4 HD channels. Success!
| link to this comment |
Trevor's: mapT's Freeview map terrainT's terrain plot wavesT's frequency data T's Freeview Detailed Coverage
Friday, 16 December 2011
R
Richard Baguley10:18 PM
Wallasey
Have lost nearly all channels.
ITV (Ch46) is at 30% strength (which is <50% of immediate post DSO) but Ch55 is 0 - 2%, Ch45 0%.
What on earth is going on? This is worse than pre DSO and is totally unacceptable.
Is there a transmitter fault?
| link to this comment |
Richard's: ...
R
Richard Baguley11:01 PM
Update
Signal strength now increased on Ch55 to 35% (c.50% of normal) but every few minutes drops to zero for a couple of seconds before returning to the same level as before.
I suspect a transmitter fault because all channels are now running at 50% of previous power and I don't believe it's atmospherics. Brian?
(My son in Langley - I'm in Dilham - reports 100% ss but that was some time after we lost everything.).
| link to this comment |
R
Richard Baguley11:02 PM
For some reason my post at 10.18 has me at Chester!
| link to this comment |
Saturday, 17 December 2011
C
Chris Wildey8:40 AM
""For some reason my post at 10.18 has me at Chester""
Blame the Switchover.
| link to this comment |
R
Richard Baguley2:27 PM
Update 2
Ch55 now showing 72% ss so it must have been a transmitter fault.
| link to this comment |
Wednesday, 28 December 2011
P
Peter10:58 AM
Using my Humax HDR Fox T2 PVR I get a set of broken white lines across the top left hand side of the screen on ITV1 & ITV 1HD only. they don't appear using any other tuner.
Anyone know the cause?
| link to this comment |
Saturday, 31 December 2011
B
Blackcat1:00 PM
I live on Thorpe Park, in Norwich and prior to the switch over had all freeview channels. Now it seems I cannot recieve things on COM4 and COM5.
I have a wharfedale DV832BN freeview box and our aerials (on the flats) were all re-done last year (so people could have the option of sky).
I have spent ages scanning these helpsites etc and can't seem to find an answer that I can make sense of! I have also re-set, re-scanned etc several times.
Does anyone know (and willing to explain to a non technical type) what this may be down to- is my freeview box likely to be outdated, or is it more likely an aerial thing?
All help greatfully recieved.
| link to this comment |
Blackcat: I am thinking that it might be an issue with the aerial system; not a fault, but due to different frequencies being used that weren't used before.
Is this a block of flats with a single aerial or do you have an aerial each? The latter is unlikely.
The multiplexes (groups of programme channels), e.g. COM4 and COM5 each have their own frequency. With TV, we usually refer to the frequencies as (UHF) channels 21 to 69 (not to be confused with logical channel numbers on a TV, 1=BBC1, 2=BBC2 etc).
Analysis of what Tacolneston used before switchover and what it uses now shows that COM4 and COM5 are on two channels that are a bit lower down than those used before switchover.
Pre-switchover, the five UHF channels used for analogue were 62, 55, 59, 65, 52 and the six digital ones were 63, 60, 53, 58, 61, 64.
Post-switchover, the six digital channels are (in order) 55, 59, 62, 42, 45, 50.
COM4 and COM5 are on Ch42 and Ch45 respectively, which is lower than those used before switchover. I suggest that this could be an explanation for the cause of your problem.
Your aerial system might have been set-up to allow the frequencies used previously through (from the aerial to your aerial socket).
If it is the aerial system that is not supplying the COM4 and COM5 signals to tennants, then only adjustment of the system will fix the problem and that is the responsibility of the landlord rather than the tennant.
Whether the above hypothesis is the reason for the problem is probably largely irrelevant as far as tennants are concerned. The responsibility probably lies with the landlord.
You could ask your neighbours if they have the same issue.
I also suggest that you try manually tuning in these two multiplexes (if your box allows manual tuning).
| link to this comment |
Select more comments
Your comment please