My Sky box has a "no signal message" - what do I do?
If you are getting the message "no signal" this would indicate that there is a problem with the signal from your dish into your box. Even without a card inserted into a Sky Digibox, if there is a signal, you will always get Sky Guide and the free channels.
Try powering off your box, remove the card, check carefully the cables, especially the connection to the dish, reapply the power and then when asked to insert your card you should then be able to see (for example) Sky News on 501 and the BBC News channel on 503.
Once you can see any channel, reinsert your card. This should, after about one minute, give you the channels you expect, such as 103, 104 and 105.
There are three ways you can attempt to reset your box. Please see
What can my do when my Sky Digibox says 'No Signal' ?.
If you continue to get "No signal", you dish may have been misaligned, or there may be a fault with the cables and connectors, or a problem with the Digibox. You can see the signal strength by pressing SERVICES, then 4-SYSTEM SETUP and 6-SIGNAL STRENGTH.
8:43 PM
paul: Sky can't turn off any free to air channels. If it is affecting two different boxes then you have a fault with either your dish or cabling. Start by turning off each Sky box at the mains and unscrew the satellite cables at the back and check that there are no strands of the outer screening braid touching the inner connector causing a short circuit, then reconnect the cables and turn each box back on and wait 5-10 minutes for the box to go through its startup process. If your channels haven't returned then follow the route of the cables from the box to the dish, looking for any signs of damage.
link to this comment |
i watch freeview through my sky dish but cant get subscirbed bt sportsince i had a a new sky hd box its say i have the wrong card.
link to this comment |
7:22 PM
ian thomas: You don't watch Freeview through a Sky dish as Freeview is broadcast from ground based transmitters which are received via an aerial on the roof (or sometimes in the loft) and cannot be received by a Sky dish (which receives signals broadcast from satellites orbiting above the equator). I think you really mean that you are using the Freesat from Sky service (i.e. a Sky box without a subscription). Have you tried pairing your viewing card with the new box from the menu? Have you tried contacting BT's customer services?
link to this comment |
10:25 PM
I can get all channels but tonight il cannot get any nat geographic
link to this comment |
12:32 PM
Vgdcwmbk:
You post has nothing to do with TV reception. Kindly stop wasting our time.
link to this comment |
3:45 PM
Bristol
What mpx does the main Mendip transmitter currently use for Freeview?
link to this comment |
Gareth's: mapG's Freeview map terrainG's terrain plot wavesG's frequency data G's Freeview Detailed Coverage
12:33 PM
Gareth:
Mendip uses 6 multiplexes, see Coverage Checker - Detailed View for details.
link to this comment |
11:08 AM
Penzance
Since approx 9.45pm last night we are not receiving and channels other than BBC I've checked with others in the village and its the same for everyone it seems? Our mast is in St Just our postal code is TR19 7DW what's going on????
link to this comment |
Moira's: mapM's Freeview map terrainM's terrain plot wavesM's frequency data M's Freeview Detailed Coverage
1:08 PM
my sky box comes up as no signal message I am not with sky anymore but I thought I could still use my box for recording ?
link to this comment |
2:37 PM
margaret cochrane: Sky+ boxes only allow you to record if you have an active subscription. However you can still watch all of the free channels. Have you checked for any loose or damaged cables or connections behind your Sky box/TV and at your dish (if you can safely access it)?
link to this comment |