Full Freeview on the Divis (Northern Ireland) transmitter
Brian Butterworth first published this on - UK Free TV
Google Streetview | Google map | Bing map | Google Earth | 54.607,-6.009 or 54°36'24"N 6°0'34"W | BT17 0NG |
The symbol shows the location of the Divis (Northern Ireland) transmitter which serves 440,000 homes. The bright green areas shown where the signal from this transmitter is strong, dark green areas are poorer signals. Those parts shown in yellow may have interference on the same frequency from other masts.
_______
Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which Freeview channels does the Divis transmitter broadcast?
If you have any kind of Freeview fault, follow this Freeview reset procedure first.Digital television services are broadcast on a multiplexes (or Mux) where many stations occupy a single broadcast frequency, as shown below.
64QAM 8K 3/4 27.1Mb/s DVB-T MPEG2
DTG-12 QSPK 8K 3/4 8.0Mb/s DVB-T MPEG2
H/V: aerial position (horizontal or vertical)
Which BBC and ITV regional news can I watch from the Divis transmitter?
BBC Newsline 0.6m homes 2.5%
from Belfast BT2 8HQ, 1,044km northeast (51°)
to BBC Northern Ireland region - 46 masts.
Are there any self-help relays?
Chapel Fields | Transposer | Central Belfast | 61 homes |
How will the Divis (Northern Ireland) transmission frequencies change over time?
1950s-80s | 1984-97 | 1997-98 | 1998-2012 | 2012-13 | 4 Mar 2020 | ||||
VHF | A K T | A K T | A K T | K T | W T | ||||
C1 | BBCtvwaves | ||||||||
C21 | C4waves | C4waves | C4waves | +D3+4 | D3+4 | ||||
C23 | SDN | SDN | |||||||
C24 | ITVwaves | ITVwaves | ITVwaves | BBCB | BBCB | ||||
C26 | ArqA | ArqA | |||||||
C27 | BBC2waves | BBC2waves | BBC2waves | BBCA | BBCA | ||||
C29 | ArqB | ||||||||
C30 | LBT | ||||||||
C31 | BBC1waves | BBC1waves | BBC1waves | ||||||
C33 | com7 | ||||||||
C34 | com8 | ||||||||
C36 | _local | ||||||||
C48 | NIMM | NIMM | |||||||
C55tv_off | com7tv_off | ||||||||
C56tv_off | COM8tv_off |
tv_off Being removed from Freeview (for 5G use) after November 2020 / June 2022 - more
Table shows multiplexes names see this article;
green background for transmission frequencies
Notes: + and - denote 166kHz offset; aerial group are shown as A B C/D E K W T
waves denotes analogue; digital switchover was 10 Oct 12 and 24 Oct 12.
How do the old analogue and currrent digital signal levels compare?
Analogue 1-4 | 500kW | |
BBCA, D3+4, BBCB | (-7dB) 100kW | |
SDN, ARQA, ARQB | (-10dB) 50kW | |
com8 | (-16dB) 12.7kW | |
com7 | (-16.1dB) 12.4kW | |
LBT | (-20dB) 5kW | |
Mux 1*, Mux 2*, Mux A*, Mux B* | (-23.4dB) 2.3kW | |
Mux C* | (-24dB) 2kW | |
Mux D* | (-24.9dB) 1.6kW | |
NIMM | (-47dB) 10W |
Which companies have run the Channel 3 services in the Divis transmitter area
|
|
Thursday, 25 October 2012
Sinead: To tune in the RT/TG4 channels, go to the manual tuning function. If there is an option to select the mode, ensure that it is set to DVB-T2 rather than DVB-T. Then select UHF channel 39. Don't press the button to scan/add channels just yet; if it gives an indication as to strength/quality on that channel note what it is.
The signal that carries RT/TG4 is broadcast from Black Mountain whereas the other Freeview channels come from Divis. Because the two are close together, for many people this is OK because they are in roughly the same direction and hence one aerial will work for both.
Because you are so close the two transmitters are 41 degrees apart. This could perhaps pose an issue. If so, then maybe turning the aerial slightly anti-clockwise (towards Black Mountain) might help.
Failing that, you may be able to receive NI Mux with a second aerial on Black Mountain or Carnmoney Hill. Or, having looked at Streetview, some of your neighbours have aerials on Clermont Carn in the Republic. These will provide all Saorview channels which your Freeview HD box will work with:
What is Saorview? | SAORVIEW
link to this comment |
L
Lorri Henry6:55 PM
Thank you Dave
Tried that but it didn't pick up CH 39
Think it might be a similar situation to Sinead's
link to this comment |
Lorri Henry: They are almost inline from your location which wouldn't be expected to cause a problem.
The only observation I will make, and I'm not at all sure that this will act to your detriment, is that the Larne transmitter also uses C39, albeit that it is vertically polarised, whereas Divis/Black Mountain is horizontally so. You may be able to adjust or replace your aerial or you may be able to receive the NI Mux using a second aerial pointing to Carnmoney Hill which might be available at your location.
link to this comment |
P
Peter8:53 PM
Hi,
Can somebody help? I cannot pick up all freeview channels. Channels SDN, ArqA, ArqB are missing. It looks that here is very high signal (BT13 3WG) and/or interference from wires of high voltage(?) which are only few meters from house. (54.6054,-5.9849)
link to this comment |
K
Kevin Coyle9:23 PM
I have a Freeview HD TV that has picked up all the RTE channels including RTE 2 HD on CH 52. Unfortunately the signal strength looks about 8% whereas the quality is about 85% or more. The picture breaks up a lot. Is there anything I can go to get strength up. I have a seperate RTE aerial from 15yrs ago installed on roof. I can see no way to het the NIMM transmissions. My postcode is BT8 8RU near Carryduff.
Thanks
link to this comment |
C
Carl9:46 PM
Sinead
I came across an I Can box whilst retuning on wedensday. I was asked to look at it as it did not pick up RTE.
I tried to tune it for the person who bought it but it would not even let me into the menu.
I think they may need a software update.
link to this comment |
C
Carl10:03 PM
Kevin have you got a mast amplifier for the RTE aerial? General rule I have found if you were getting a good analogue signal from the South before DSO all should be ok if it was fuzzy then not so good.
Another route you could go would be saorsat which would mean a dish and freesat HD box this would get you all Irish channels apart from TV3.
link to this comment |
S
Sinead10:57 PM
Thanks Dave, I selected manual scan it only appears as RF channel 39 not UHF channel 39, no strength or quality appeared. The box is set to DVB-T2 mode. I will try and get the aerial adjusted and let you know how I get on.
Thanks Carl, I updated the software last night on the I Can box it is Version 020711. It is really annoying as I expected a rush for the boxes and thought I was well prepared buying in advance.
link to this comment |
K
Kevin Coyle11:02 PM
Belfast
Thanks Carl
Picture before DSO was fine. I've no idea if I have a mast amplifier. I'm afraid I'm totally ignorant when it comes to TV stuff.
I suspect I should get a local TV engineer to have a look at things.
Its an LG TV and I found a Booster option in the settings. When I switch it on then the picture improves to the point of being very watchable. Just the odd breakup of signal.
link to this comment |
Kevin's: mapK's Freeview map terrainK's terrain plot wavesK's frequency data K's Freeview Detailed Coverage
C
Carl11:31 PM
Just another one I have found since DSO a lot of people have their sky channel set on 40 for feeding around the house this directly effects the NIMM which is now transmitted on 39 hence you will need to change the rf channel of the sky box to 45 in Divis area.
link to this comment |
Select more comments
Your comment please