All posts by Jaz
Below are all of Jaz's postings, with the most recent are at the bottom of the page.
HP SDN, ARQa, ARQb are not yet running at 50kw they are still at 20kw they wont go to 50kw until the 18 April
It shows you that on DIG UK for 21st of March put your pointer on the channel number it will show 20kw it only shows 50kw on 18th April, its listed the same on this site as well
Its also detailed below
http://www.digitaluk.co.u….pdf
| link to this comment |
@Patrick
That's happened because you have picked up channels from another BBC region as well, different equipment behaves differently when it finds duplicate BBC channels, if its HD channels newer equipment should ask which region to use
I found the easiest option is to delete the BBC channels and then do a manual scan of C24 if its done similar with the HD channels then do the same thing and do a manual scan of C21
| link to this comment |
Just to add to what I wrote above I meant to say delete "all" the SD BBC channels or all the hd channels then do a manual scan of C24 or C21
| link to this comment |
Thursday 22 March 2012 2:05PM
I was looking forward to a nice strong signal only to find out C30, C33, C37 are staying on low power so I now have two extremes 21, 24, 27 are to strong and C30, C33 are fluctuating/unstable if I attenuate the strong I loose the low power commercials
Hopefully when they go up to 50kw it will solve my problems if it doesn't I guess I'll have to use the vertically polarized
One question can you use a wideband aerial in the vertical polarized position ?