News
TV
Freeview
Freesat
Maps
Radio
Help!
Archive (2002-)
All posts by LutonFan
Below are all of LutonFan's postings, with the most recent are at the bottom of the page.david- Are you using RF1 out to the main TV? If so and it tunes into the main set OK, remove the RF lead plugged into RF2 out and plug into RF1 out; then retune one of the other sets.
If this tuning is successful, then it could be that the RF2 outlet is faulty. If it is not, then the RF lead you are using from RF2 is faulty.
Hope this makes sense.
link to this comment |
Sandy Heath (Central Bedfordshire, England) Full Freeview trans
Wednesday 23 March 2011 10:02PM
Northampton
Wednesday 23 March 2011 10:02PM
Northampton
alan carson- You may receive signals from a relay(Dallington Park). Do you currently only receive analogue channels 1-4? If so, you will receive MUX 1 and 2 from DSO and no digital signals until then.
link to this comment |
Adam B- I am actually a Bedford 'Hatter'. I was just looking at Alan's postcode location and forgot to remove it.
link to this comment |
Sam- You are referring to the Freesat dish? Try unplugging the box, then refit the 'F' connecter, then power up the box.
If this does not work, you may need to get someone to look at the dish and/or Sky coax lead.
link to this comment |
barjacks- Use a second HDMI lead and use that to connect your DVD to the TV. Insert a scart lead into the output socket of your video; the other end into the TV.
link to this comment |
John- Should be OK as far as I am concerned, just keep the box well away from any magnets eg car speakers and so forth.
link to this comment |
Helena Watson- Can you be more specific in regards details of your setup please?
link to this comment |
simon- Is the main aerial lead plugged into the Samsung or the Panasonic? If it is plugged into the Samsung, are you using an indoor aerial for the Panasonic?
If the latter, try plugging the main aerial lead into the Panasonic and re-tune the set.
link to this comment |
Tuesday 22 March 2011 9:31PM
welvaert- Are you posting on the correct page? This box does not provide the facility you describe. Is the time provided by your TV?