Single frequency interference
There are several different type of interference that cause problems. This page deals with the situation where:
- Freeview reception is perfect or near-perfect most of the time
- Several channels are missing, but they are all on the same 'multiplex'
Local analogue interference
Local analogue interference is caused by household video devices that you can attach to a television such as: If you have any of these devices, you will need to work out which of these is blocking the reception of a Freeview multiplex by turning off the suspect device and then rescanning for channels on the Freeview box.If powering off the device restores the Freeview channels from the blocked multiplex, you will need to either stop using the problem device's RF output by disconnecting the RF output cable permanently, or by changing the RF channel number that that device uses. See, for example, How do I change the RF output channel on a Sky Digibox?
You can find a list of the frequencies that are not in use at your location by putting your postcode into the My Freeview reception and looking under the "Free RF channels" section.
Non-wideband aerial in some areas
In some places you will need a wideband aerial to receive all the Freeview multiplexes. For example in Central Birmingham, the Sutton Coldfield has multiplex D on an 'out of group', so you cannot view Film4 or ITV2+1 without an aerial upgrade.To find out if you need an aerial upgrade, see My Freeview reception.
Help with Freeview, aerials?
Tuesday, 25 January 2011
H
Helen7:28 PM
Hurrah!!!!! Fixed it. I have also now got HD. Which I didn't have before. I realise I may only have it for a brief period, but tonight I have it all. Including HD :-) Yes, I know I need to get out more. Don't want to tread on anyone's toes as the newbie in here, but people may want to try this.
I read that sometimes cheap HDMI leads can cause interference. Mine was the one that came with the HD recorder box so I have no idea as to its quality. Swap to SCART it said. So I did, and ran an update for the 3 millionth time in the last 2 days, and low and behold, I have multiplex 1 back and HD.
Thanks for the info that is on this site it helped me narrow stuff down. I have saved it as a favourite.
Cheers Helen
link to this comment |
Wednesday, 26 January 2011
oyster: I would start by suspecting the internal aerial cables.
If you use a shared aerial system, contact the management company, as they will be responsible for ensure it works correctly.
link to this comment |
B
Brian4:01 PM
Leicester
ref earlier posting - the new set is in a bedroom and it is not possible to route its aerial through the booster/splitter.
link to this comment |
Brian's: mapB's Freeview map terrainB's terrain plot wavesB's frequency data B's Freeview Detailed Coverage
O
oyster6:16 PM
Many thanks Briantist (I hope you are being paid by someone for all your postings!?)
One follow up question/curiosity: from other similar postings why is it that this type of interference seems to always affect this ITV group first? Is there a known harmonic of another frequency?
link to this comment |
oyster: Multiplex A in pre-switchover areas is broadcast in the less robust 64QAM mode, see Freeview modes | ukfree.tv - independent free digital TV advice .
link to this comment |
Thursday, 27 January 2011
O
oyster9:55 PM
That explains it perfectly thanks! I come from Guernsey where we never had freeview before last November when switchover was in one night analogue off/digital on. That's why I am not familiar with digital interference! ITV is working again after fiddling with aerial connections. Thanks again.
link to this comment |
Friday, 28 January 2011
oyster: I'm glad to hear that you've got your channels back.
link to this comment |
Tuesday, 1 February 2011
R
rob10:28 PM
hi, I think i am having an interference problem. I ve had reception problems in my bedroom for the last year, but due to engineering work on emley moor and not watching much tv I never figured out what was going on.
After much messing about, the problem is that when the tv is one downstairs(showing a picture, standby is fine), i get interference upstairs on another tv. On the tv upstairs I can only view mux 1 channels, all the others loose signal. soon as the downstairs tv is put into standby all the channels, upsairs return.
The aerial to the bedroom comes in as an extension from the lounge which has the tv, which is causing the problem, next to it. The problem tv is running Sky HD and this problem has not been experienced on the tv which uses analogue, in a different room.
What can I do to rectify this? any help would be appreciated.
thanks
link to this comment |
Wednesday, 2 February 2011
Select more comments
Your comment please